com.esri.arcgis.geometry
Class AffineTransformation3D

java.lang.Object
  extended by com.esri.arcgis.geometry.AffineTransformation3D
All Implemented Interfaces:
IAffineTransformation3D, IAffineTransformation3DGEN, ITransformation, ITransformation3D, ITransformation3DGEN, ITransformationGEN, com.esri.arcgis.interop.RemoteObjRef, IClone, ISupportErrorInfo, Serializable

public class AffineTransformation3D
extends Object
implements com.esri.arcgis.interop.RemoteObjRef, ITransformationGEN, ITransformation3DGEN, ITransformation, ITransformation3D, IAffineTransformation3D, IAffineTransformation3DGEN, IClone, ISupportErrorInfo

A three dimensional transformation.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

See Also:
Serialized Form

Constructor Summary
AffineTransformation3D()
          Constructs a AffineTransformation3D using ArcGIS Engine.
AffineTransformation3D(Object obj)
          Deprecated. As of ArcGIS 9.2, replaced by normal Java casts.
AffineTransformation3D theAffineTransformation3D = (AffineTransformation3D) obj;
 
Method Summary
 void assign(IClone src)
          Assigns the properties of src to the receiver.
 void defineFromControlPoints(int numPoints, IPoint fromPoints, IPoint toPoints)
          Defines the best 3D affine transformation between two sets of points.
 void defineFromControlPoints(IPoint[] fromPoints, IPoint[] toPoints)
          Defines the best 3D affine transformation between two sets of points.
 boolean equals(Object o)
          Compare this object with another
 IClone esri_clone()
          Clones the receiver and assigns the result to *clone.
static String getClsid()
          getClsid.
 void getControlPointError(int i, double[] fromError, double[] toError)
          Returns the errors involved in moving control point i from the 'from' to 'to' system.
 void getRMSError(double[] fromError, double[] toError)
          RMS (Root Mean Square) error expressed relative to the 'from' and 'to' points defining the transformation.
 int hashCode()
          the hashcode for this object
 void interfaceSupportsErrorInfo(GUID riid)
          interfaceSupportsErrorInfo
 boolean isEqual(IClone other)
          Returns TRUE when the receiver and other have the same properties.
 boolean isIdentical(IClone other)
          Returns TRUE when the receiver and other are the same object.
 void postMultiply(ITransformation3D postTransform)
          Post-multiplies the transformation by another transformation.
 void preMultiply(ITransformation3D preTransform)
          Pre-multiplies the transformation by another transformation.
 void reset()
          Resets the transformation to unit matrix.
 void rotate(double rotationAngle, IVector3D rotationAxis)
          Adds a rotation in radians to the transformation matrix.
 void scale(double sx, double sy, double sz)
          Adds a scaling factor to the transformation matrix.
 void transform(_WKSPointZ[] originalPoints, _WKSPointZ[][] transformedPoints)
          Applies the current transformation to a set of points.
 void transform(int numPoints, _WKSPointZ originalPoints, _WKSPointZ[] transformedPoints)
          Applies the current transformation to a set of points.
 void transformMeasuresFF(int direction, double[] inMeasures, double[][] outMeasures)
          Transforms floating point measures to floating point measures (or do the inverse).
 void transformMeasuresFF(int direction, int cMeasures, double[] inMeasures, double[] outMeasures)
          Transforms floating point measures to floating point measures (or do the inverse).
 void transformMeasuresFI(int direction, double[] inMeasures, int[][] outMeasures)
          Transforms floating point measures to integer measures (or do the inverse).
 void transformMeasuresFI(int direction, int cMeasures, double[] inMeasures, int[] outMeasures)
          Transforms floating point measures to integer measures (or do the inverse).
 void transformMeasuresIF(int direction, int[] inMeasures, double[][] outMeasures)
          Transforms integer measures to floating point measures (or do the inverse).
 void transformMeasuresIF(int direction, int cMeasures, int[] inMeasures, double[] outMeasures)
          Transforms integer measures to floating point measures (or do the inverse).
 void transformMeasuresII(int direction, int[] inMeasures, int[][] outMeasures)
          Transforms integer measures to integer measures (or do the inverse).
 void transformMeasuresII(int direction, int cMeasures, int[] inMeasures, int[] outMeasures)
          Transforms integer measures to integer measures (or do the inverse).
 void transformPointsFF(int direction, double[] inPoints, double[][] outPoints)
          Transforms floating point points to floating point points (or do the inverse).
 void transformPointsFF(int direction, int cPoints, double[] inPoints, double[] outPoints)
          Transforms floating point points to floating point points (or do the inverse).
 void transformPointsFI(int direction, double[] inPoints, int[][] outPoints)
          Transforms floating point points to integer points (or do the inverse).
 void transformPointsFI(int direction, int cPoints, double[] inPoints, int[] outPoints)
          Transforms floating point points to integer points (or do the inverse).
 void transformPointsIF(int direction, int[] inPoints, double[][] outPoints)
          Transforms integer points to floating point points (or do the inverse).
 void transformPointsIF(int direction, int cPoints, int[] inPoints, double[] outPoints)
          Transforms integer points to floating point points (or do the inverse).
 void transformPointsII(int direction, int[] inPoints, int[][] outPoints)
          Transforms integer points to integer points (or do the inverse).
 void transformPointsII(int direction, int cPoints, int[] inPoints, int[] outPoints)
          Transforms integer points to integer points (or do the inverse).
 void translate(IVector3D offsetVector)
          Adds an offset (move) to the transformation matrix.
 
Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, toString, wait, wait, wait
 
Methods inherited from interface com.esri.arcgis.interop.RemoteObjRef
getJintegraDispatch, release
 

Constructor Detail

AffineTransformation3D

public AffineTransformation3D()
                       throws IOException,
                              UnknownHostException
Constructs a AffineTransformation3D using ArcGIS Engine.

Throws:
IOException - if there are interop problems
UnknownHostException - if there are interop problems

AffineTransformation3D

public AffineTransformation3D(Object obj)
                       throws IOException
Deprecated. As of ArcGIS 9.2, replaced by normal Java casts.
AffineTransformation3D theAffineTransformation3D = (AffineTransformation3D) obj;

Construct a AffineTransformation3D using a reference to such an object returned from ArcGIS Engine or Server. This is semantically equivalent to casting obj to AffineTransformation3D.

Parameters:
obj - an object returned from ArcGIS Engine or Server
Throws:
IOException - if there are interop problems
Method Detail

getClsid

public static String getClsid()
getClsid.


equals

public boolean equals(Object o)
Compare this object with another

Overrides:
equals in class Object

hashCode

public int hashCode()
the hashcode for this object

Overrides:
hashCode in class Object

transformMeasuresFF

public void transformMeasuresFF(int direction,
                                double[] inMeasures,
                                double[][] outMeasures)
                         throws IOException,
                                AutomationException
Transforms floating point measures to floating point measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformMeasuresFF in interface IAffineTransformation3DGEN
Specified by:
transformMeasuresFF in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresFI

public void transformMeasuresFI(int direction,
                                double[] inMeasures,
                                int[][] outMeasures)
                         throws IOException,
                                AutomationException
Transforms floating point measures to integer measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformMeasuresFI in interface IAffineTransformation3DGEN
Specified by:
transformMeasuresFI in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresIF

public void transformMeasuresIF(int direction,
                                int[] inMeasures,
                                double[][] outMeasures)
                         throws IOException,
                                AutomationException
Transforms integer measures to floating point measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformMeasuresIF in interface IAffineTransformation3DGEN
Specified by:
transformMeasuresIF in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresII

public void transformMeasuresII(int direction,
                                int[] inMeasures,
                                int[][] outMeasures)
                         throws IOException,
                                AutomationException
Transforms integer measures to integer measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformMeasuresII in interface IAffineTransformation3DGEN
Specified by:
transformMeasuresII in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsFF

public void transformPointsFF(int direction,
                              double[] inPoints,
                              double[][] outPoints)
                       throws IOException,
                              AutomationException
Transforms floating point points to floating point points (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformPointsFF in interface IAffineTransformation3DGEN
Specified by:
transformPointsFF in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsFI

public void transformPointsFI(int direction,
                              double[] inPoints,
                              int[][] outPoints)
                       throws IOException,
                              AutomationException
Transforms floating point points to integer points (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformPointsFI in interface IAffineTransformation3DGEN
Specified by:
transformPointsFI in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsIF

public void transformPointsIF(int direction,
                              int[] inPoints,
                              double[][] outPoints)
                       throws IOException,
                              AutomationException
Transforms integer points to floating point points (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformPointsIF in interface IAffineTransformation3DGEN
Specified by:
transformPointsIF in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsII

public void transformPointsII(int direction,
                              int[] inPoints,
                              int[][] outPoints)
                       throws IOException,
                              AutomationException
Transforms integer points to integer points (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transformPointsII in interface IAffineTransformation3DGEN
Specified by:
transformPointsII in interface ITransformationGEN
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

reset

public void reset()
           throws IOException,
                  AutomationException
Resets the transformation to unit matrix.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
reset in interface ITransformation3D
Specified by:
reset in interface ITransformation3DGEN
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

translate

public void translate(IVector3D offsetVector)
               throws IOException,
                      AutomationException
Adds an offset (move) to the transformation matrix.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
translate in interface ITransformation3D
Specified by:
translate in interface ITransformation3DGEN
Parameters:
offsetVector - A reference to a com.esri.arcgis.geometry.IVector3D (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

scale

public void scale(double sx,
                  double sy,
                  double sz)
           throws IOException,
                  AutomationException
Adds a scaling factor to the transformation matrix.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
scale in interface ITransformation3D
Specified by:
scale in interface ITransformation3DGEN
Parameters:
sx - The sx (in)
sy - The sy (in)
sz - The sz (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

rotate

public void rotate(double rotationAngle,
                   IVector3D rotationAxis)
            throws IOException,
                   AutomationException
Adds a rotation in radians to the transformation matrix.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
rotate in interface ITransformation3D
Specified by:
rotate in interface ITransformation3DGEN
Parameters:
rotationAngle - The rotationAngle (in)
rotationAxis - A reference to a com.esri.arcgis.geometry.IVector3D (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

postMultiply

public void postMultiply(ITransformation3D postTransform)
                  throws IOException,
                         AutomationException
Post-multiplies the transformation by another transformation.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
postMultiply in interface ITransformation3D
Specified by:
postMultiply in interface ITransformation3DGEN
Parameters:
postTransform - A reference to a com.esri.arcgis.geometry.ITransformation3D (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

preMultiply

public void preMultiply(ITransformation3D preTransform)
                 throws IOException,
                        AutomationException
Pre-multiplies the transformation by another transformation.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
preMultiply in interface ITransformation3D
Specified by:
preMultiply in interface ITransformation3DGEN
Parameters:
preTransform - A reference to a com.esri.arcgis.geometry.ITransformation3D (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transform

public void transform(_WKSPointZ[] originalPoints,
                      _WKSPointZ[][] transformedPoints)
               throws IOException,
                      AutomationException
Applies the current transformation to a set of points. Use of methods on ITransform3D is recommended instead of this method.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
transform in interface ITransformation3DGEN
Parameters:
originalPoints - A Structure: com.esri.arcgis.system._WKSPointZ (An array of com.esri.arcgis.system._WKSPointZ COM typedef) (in)
transformedPoints - A Structure: com.esri.arcgis.system._WKSPointZ (An array of com.esri.arcgis.system._WKSPointZ COM typedef) (in/out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresFF

public void transformMeasuresFF(int direction,
                                int cMeasures,
                                double[] inMeasures,
                                double[] outMeasures)
                         throws IOException,
                                AutomationException
Transforms floating point measures to floating point measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformMeasuresFF in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cMeasures - The cMeasures (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresFI

public void transformMeasuresFI(int direction,
                                int cMeasures,
                                double[] inMeasures,
                                int[] outMeasures)
                         throws IOException,
                                AutomationException
Transforms floating point measures to integer measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformMeasuresFI in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cMeasures - The cMeasures (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresIF

public void transformMeasuresIF(int direction,
                                int cMeasures,
                                int[] inMeasures,
                                double[] outMeasures)
                         throws IOException,
                                AutomationException
Transforms integer measures to floating point measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformMeasuresIF in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cMeasures - The cMeasures (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformMeasuresII

public void transformMeasuresII(int direction,
                                int cMeasures,
                                int[] inMeasures,
                                int[] outMeasures)
                         throws IOException,
                                AutomationException
Transforms integer measures to integer measures (or do the inverse).

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformMeasuresII in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cMeasures - The cMeasures (in)
inMeasures - The inMeasures (in)
outMeasures - The outMeasures (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsFF

public void transformPointsFF(int direction,
                              int cPoints,
                              double[] inPoints,
                              double[] outPoints)
                       throws IOException,
                              AutomationException
Transforms floating point points to floating point points (or do the inverse).

Remarks

The cPoints parameter is the number of points you wish to transform. inPoints and outPoints are one-dimensional arrays so you must interleave coordinate pairs into the arrays.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformPointsFF in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cPoints - The cPoints (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsFI

public void transformPointsFI(int direction,
                              int cPoints,
                              double[] inPoints,
                              int[] outPoints)
                       throws IOException,
                              AutomationException
Transforms floating point points to integer points (or do the inverse).

Remarks

The cPoints parameter is the number of points you wish to transform. inPoints and outPoints are one-dimensional arrays so you must interleave coordinate pairs into the arrays.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformPointsFI in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cPoints - The cPoints (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsIF

public void transformPointsIF(int direction,
                              int cPoints,
                              int[] inPoints,
                              double[] outPoints)
                       throws IOException,
                              AutomationException
Transforms integer points to floating point points (or do the inverse).

Remarks

The cPoints parameter is the number of points you wish to transform. inPoints and outPoints are one-dimensional arrays so you must interleave coordinate pairs into the arrays.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformPointsIF in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cPoints - The cPoints (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transformPointsII

public void transformPointsII(int direction,
                              int cPoints,
                              int[] inPoints,
                              int[] outPoints)
                       throws IOException,
                              AutomationException
Transforms integer points to integer points (or do the inverse).

Remarks

The cPoints parameter is the number of points you wish to transform. inPoints and outPoints are one-dimensional arrays so you must interleave coordinate pairs into the arrays.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transformPointsII in interface ITransformation
Parameters:
direction - A com.esri.arcgis.geometry.esriTransformDirection constant (in)
cPoints - The cPoints (in)
inPoints - The inPoints (in)
outPoints - The outPoints (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

transform

public void transform(int numPoints,
                      _WKSPointZ originalPoints,
                      _WKSPointZ[] transformedPoints)
               throws IOException,
                      AutomationException
Applies the current transformation to a set of points. Use of methods on ITransform3D is recommended instead of this method.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
transform in interface ITransformation3D
Parameters:
numPoints - The numPoints (in)
originalPoints - A Structure: com.esri.arcgis.system._WKSPointZ (A com.esri.arcgis.system._WKSPointZ COM typedef) (in)
transformedPoints - A Structure: com.esri.arcgis.system._WKSPointZ (A com.esri.arcgis.system._WKSPointZ COM typedef) (out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

defineFromControlPoints

public void defineFromControlPoints(int numPoints,
                                    IPoint fromPoints,
                                    IPoint toPoints)
                             throws IOException,
                                    AutomationException
Defines the best 3D affine transformation between two sets of points. Can be used to register paper maps on a digitizer.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
defineFromControlPoints in interface IAffineTransformation3D
Parameters:
numPoints - The numPoints (in)
fromPoints - A reference to a com.esri.arcgis.geometry.IPoint (in)
toPoints - A reference to a com.esri.arcgis.geometry.IPoint (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getRMSError

public void getRMSError(double[] fromError,
                        double[] toError)
                 throws IOException,
                        AutomationException
RMS (Root Mean Square) error expressed relative to the 'from' and 'to' points defining the transformation. These error terms are valid after using DefineFromControlPoints/Ex to define the transformation.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getRMSError in interface IAffineTransformation3D
Specified by:
getRMSError in interface IAffineTransformation3DGEN
Parameters:
fromError - The fromError (out: use single element array)
toError - The toError (out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getControlPointError

public void getControlPointError(int i,
                                 double[] fromError,
                                 double[] toError)
                          throws IOException,
                                 AutomationException
Returns the errors involved in moving control point i from the 'from' to 'to' system. These error terms are valid after using DefineFromControlPoints/Ex to define the transformation.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getControlPointError in interface IAffineTransformation3D
Specified by:
getControlPointError in interface IAffineTransformation3DGEN
Parameters:
i - The i (in)
fromError - The fromError (out: use single element array)
toError - The toError (out: use single element array)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

defineFromControlPoints

public void defineFromControlPoints(IPoint[] fromPoints,
                                    IPoint[] toPoints)
                             throws IOException,
                                    AutomationException
Defines the best 3D affine transformation between two sets of points. Can be used to register paper maps on a digitizer.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
defineFromControlPoints in interface IAffineTransformation3DGEN
Parameters:
fromPoints - A reference to a com.esri.arcgis.geometry.IPoint array (in)
toPoints - A reference to a com.esri.arcgis.geometry.IPoint array (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

esri_clone

public IClone esri_clone()
                  throws IOException,
                         AutomationException
Clones the receiver and assigns the result to *clone.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
esri_clone in interface IClone
Returns:
A reference to a com.esri.arcgis.system.IClone
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

assign

public void assign(IClone src)
            throws IOException,
                   AutomationException
Assigns the properties of src to the receiver.

Description

Use Assign method to assign the properties of source object to receiver object. Both objects need to have the same CLSIDs. Both source and receiver objects need to be instantiated.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
assign in interface IClone
Parameters:
src - A reference to a com.esri.arcgis.system.IClone (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isEqual

public boolean isEqual(IClone other)
                throws IOException,
                       AutomationException
Returns TRUE when the receiver and other have the same properties.

Description

IsEqual returns True if the receiver and the source have the same properties. Note, this does not imply that the receiver and the source reference the same object.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isEqual in interface IClone
Parameters:
other - A reference to a com.esri.arcgis.system.IClone (in)
Returns:
The equal
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isIdentical

public boolean isIdentical(IClone other)
                    throws IOException,
                           AutomationException
Returns TRUE when the receiver and other are the same object.

Description

IsIdentical returns true if the receiver and the source reference the same object.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isIdentical in interface IClone
Parameters:
other - A reference to a com.esri.arcgis.system.IClone (in)
Returns:
The identical
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

interfaceSupportsErrorInfo

public void interfaceSupportsErrorInfo(GUID riid)
                                throws IOException,
                                       AutomationException
interfaceSupportsErrorInfo

Description

Indicates whether the interface supports IErrorInfo.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
interfaceSupportsErrorInfo in interface ISupportErrorInfo
Parameters:
riid - A Structure: com.esri.arcgis.support.ms.stdole.GUID (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.