

PREV CLASS NEXT CLASS  FRAMES NO FRAMES  
SUMMARY: NESTED  FIELD  CONSTR  METHOD  DETAIL: FIELD  CONSTR  METHOD 
java.lang.Object com.esri.arcgis.geometry.EllipticArc
public class EllipticArc
A portion of the boundary of a 2D ellipse that connects two points; optionally has measure, height and ID attributes at each endpoint.
Constructor Summary  

EllipticArc()
Constructs a EllipticArc using ArcGIS Engine. 

EllipticArc(Object obj)
Deprecated. As of ArcGIS 9.2, replaced by normal Java casts. EllipticArc theEllipticArc = (EllipticArc) obj; 
Method Summary  

void 
assign(IClone src)
Assigns the properties of src to the receiver. 
void 
complement()
Changes this ellipse into its complement; 'from' and 'to' points are unchanged. 
void 
constructEnvelope(IEnvelope boundingEnvelope)
Constructs the inscribed ellipse of the given envelope. 
void 
constructQuarterEllipse(IPoint fromPoint,
IPoint toPoint,
boolean cCW)
Construct an elliptic arc that starts at fromPoint, goes to toPoint, and spans an angle of pi/2. 
void 
constructTwoPointsEnvelope(IPoint fromPoint,
IPoint toPoint,
IEnvelope suggestedEnvelope,
int orientation)
Construct an elliptic arc that starts at fromPoint, goes to toPoint, and tries to have the embedded ellipse inscribed in the suggestedEnvelope. 
void 
constructUpToFivePoints(IPoint from,
IPoint to,
IPoint thru,
IPoint point4,
IPoint point5)
Constructs an elliptic arc, given up to 5 points, such that the embedded ellipse passes through as many as possible. 
void 
densify(int cInSlots,
double maxDeviation,
int[] pcOutSegments,
ILine[] segments)
Deprecated. This method uses C style arrays which are not supported in the ArcGIS API for Java. It is replaced by GeometryEnvironment.densify(com.esri.arcgis.geometry.ISegment, double, int[], com.esri.arcgis.geometry.ILine[][]) . 
boolean 
equals(Object o)
Compare this object with another 
IClone 
esri_clone()
Clones the receiver and assigns the result to *clone. 
void 
geographicShift(double splitLongitude)
Shift longitudes to the right of splitLongitude. 
void 
geoNormalize()
Shifts longitudes, if need be, into a continuous range of 360 degrees. 
void 
geoNormalizeFromLongitude(double longitude)
Normalizes longitudes into a continuous range containing the longitude. 
void 
getAxes(double[] semiMajor,
double[] semiMinor,
double[] minorMajorRatio)
Gets the semimajor and semiminor axes. 
IPoint 
getCenterPoint()
The center point of the arc. 
double 
getCentralAngle()
The included (or central) angle. 
static String 
getClsid()
getClsid. 
int 
getDimension()
The topological dimension of this geometry. 
IEnvelope 
getEnvelope()
Creates a copy of this geometry's envelope and returns it. 
double 
getFromAngle(boolean ellipseStd)
The start angle (measured from a horizontal line through the center point) defining where the arc starts. 
IPoint 
getFromPoint()
The 'from' point of the curve. 
int 
getGeometryType()
The type of this geometry. 
void 
getIDs(int[] fromID,
int[] toID)
Get the IDs on the segment's endpoints. 
double 
getLength()
The length of the curve. 
void 
getMs(double[] fromM,
double[] toM)
Get the Ms on the segment's endpoints. 
ISpatialReference 
getSpatialReference()
The spatial reference associated with this geometry. 
void 
getSubcurve(double fromDistance,
double toDistance,
boolean asRatio,
ICurve[] outSubcurve)
Extracts a portion of this curve into a new curve. 
double 
getToAngle(boolean ellipseStd)
The end angle (measured from a horizontal line through the center point) defining where the arc ends. 
IPoint 
getToPoint()
The 'to' point of the curve. 
void 
getZs(double[] fromZ,
double[] toZ)
Get the Zs on the segment's endpoints. 
int 
hashCode()
the hashcode for this object 
void 
interfaceSupportsErrorInfo(GUID riid)
interfaceSupportsErrorInfo 
boolean 
isCircular()
Indicates if this elliptical arc is acutally circular (major and minor axes same length). 
boolean 
isClosed()
Indicates if 'from' and 'to' points (of each part) are identical. 
boolean 
isCounterClockwise()
Indicates if this elliptic arc is oriented counterclockwise from its 'from' point to its 'to' point. 
boolean 
isEmpty()
Indicates whether this geometry contains any points. 
boolean 
isEqual(IClone other)
Returns TRUE when the receiver and other have the same properties. 
boolean 
isIdentical(IClone other)
Returns TRUE when the receiver and other are the same object. 
boolean 
isLine()
Indicates if the arc is degenerated to a line. 
boolean 
isMinor()
Indicates whether the arc is a minor arc or a major arc. 
boolean 
isPoint()
Indicates if the arc is degenerated to a point. 
void 
move(double dx,
double dy)
Moves dx units horizontally and dy units vertically. 
void 
moveVector(ILine v)
Moves a direction and distance v. 
void 
project(ISpatialReference newReferenceSystem)
Projects this geometry into a new spatial reference. 
void 
putAxes(double semiMajor,
double minorMajorRatio)
Sets the semimajor and semiminor axes. 
void 
putCoords(boolean ellipseStd,
IPoint center,
IPoint from,
IPoint to,
double rotationAngle,
double minorMajorRatio,
int orientation)
Sets the center point and endpoints, angle of rotation, and orientation. 
void 
putCoordsByAngle(boolean ellipseStd,
IPoint center,
double fromAngle,
double centralAngle,
double rotationAngle,
double semiMajor,
double minorMajorRatio)
Sets the center point, starting angle, signed central angle, angle of rotation, ratio of the minor axis to the major axis, and axes. 
void 
putCoordsEx(IPoint from,
IPoint to)
Sets this segment's endpoints to 'from' and 'to'. 
void 
queryCenterPoint(IPoint center)
Copies the center of this arc to the input point. 
void 
queryCoords(boolean ellipseStd,
IPoint center,
IPoint from,
IPoint to,
double[] rotationAngle,
double[] minorMajorRatio,
boolean[] isCCW,
boolean[] minor)
Copies the center and endpoints, angle of rotation, orientation and major/minor properties into the method parameters. 
void 
queryCoordsByAngle(boolean ellipseStd,
IPoint center,
double[] fromAngle,
double[] centralAngle,
double[] rotationAngle,
double[] semiMajor,
double[] minorMajorRatio)
Returns the center point, starting angle, signed central angle, angle of rotation, ratio of the minor axis to the major axis, and axes. 
void 
queryCurvature(double distanceAlongCurve,
boolean asRatio,
double[] curvature,
ILine unitVector)
Finds curvature and unit vector starting at point on segment and directed to embedded circle center. 
void 
queryEnvelope(IEnvelope outEnvelope)
Copies this geometry's envelope properties into the specified envelope. 
void 
queryFromPoint(IPoint from)
Copies this curve's 'from' point to the input point. 
void 
queryNearestPoint(IPoint p,
int extension,
IPoint nearest)
Copies into 'nearest' a point on this geometry nearest to the input point. 
void 
queryNormal(int extension,
double distanceAlongCurve,
boolean asRatio,
double length,
ILine normal)
Constructs a line normal to a curve from a point at a specified distance along the curve. 
void 
queryPoint(int extension,
double distanceAlongCurve,
boolean asRatio,
IPoint outPoint)
Copies to outPoint the properties of a point on the curve at a specified distance from the beginning of the curve. 
void 
queryPointAndDistance(int extension,
IPoint inPoint,
boolean asRatio,
IPoint outPoint,
double[] distanceAlongCurve,
double[] distanceFromCurve,
boolean[] bRightSide)
Finds the point on the curve closest to inPoint, then copies that point to outPoint; optionally calculates related items. 
void 
queryPointsAndDistances(int extension,
double searchRadius,
IPoint inPoint,
boolean asRatio,
double[] distanceFromCurve,
IEnumPointAndDistance[] pointsAndDistances)
Given an input point, calculates the minimum distance to the geometry and provides an enumerator over all closest points on the geometry, along with additional information. 
void 
queryTangent(int extension,
double distanceAlongCurve,
boolean asRatio,
double length,
ILine tangent)
Constructs a line tangent to a curve from a point at a specified distance along the curve. 
void 
queryToPoint(IPoint to)
Copies the curve's 'to' point into the input point. 
double 
returnDistance(IGeometry other)
Returns the minimum distance between two geometries. 
IPoint 
returnNearestPoint(IPoint p,
int extension)
Creates and returns a point on this geometry nearest to the input point. 
int 
returnTurnDirection(ISegment otherSegment)
Finds turn direction between two connected segments. 
void 
reverseOrientation()
Reverses the parameterization of the curve ('from' point becomes 'to' point, first segment becomes last segment, etc). 
void 
rotate(IPoint origin,
double rotationAngle)
Rotates about the specified origin point. 
void 
scale(IPoint origin,
double sx,
double sy)
Scales about the specified origin using seperate horizonal and vertical scales. 
void 
setCentralAngle(double centralAngle)
The included (or central) angle. 
void 
setEmpty()
Removes all points from this geometry. 
void 
setFromAngle(boolean ellipseStd,
double fromAngle)
The start angle (measured from a horizontal line through the center point) defining where the arc starts. 
void 
setFromPoint(IPoint from)
The 'from' point of the curve. 
void 
setIDs(int fromID,
int toID)
Set the IDs on the segment's endpoints. 
void 
setIsCounterClockwise(boolean isCCW)
Indicates if this elliptic arc is oriented counterclockwise from its 'from' point to its 'to' point. 
void 
setIsMinor(boolean isMinor)
Indicates whether the arc is a minor arc or a major arc. 
void 
setMs(double fromM,
double toM)
Set the Ms on the segment's endpoints. 
void 
setSpatialReferenceByRef(ISpatialReference spatialRef)
The spatial reference associated with this geometry. 
void 
setToAngle(boolean ellipseStd,
double toAngle)
The end angle (measured from a horizontal line through the center point) defining where the arc ends. 
void 
setToPoint(IPoint to)
The 'to' point of the curve. 
void 
setZs(double fromZ,
double toZ)
Set the Zs on the segment's endpoints. 
void 
snapToSpatialReference()
Moves points of this geometry so that they can be represented in the precision of the geometry's associated spatial reference system. 
void 
splitAtDistance(double distances,
boolean asRatio,
ISegment[] fromSegment,
ISegment[] toSegment)
Split segment at specified distance. 
void 
splitDivideLength(double offset,
double length,
boolean asRatio,
int[] numSplitSegments,
ISegment splitSegments)
Deprecated. This method uses C style arrays which are not supported in the ArcGIS API for Java. It is replaced by GeometryEnvironment.splitDivideLength(com.esri.arcgis.geometry.ISegment, double, double, boolean, int[], com.esri.arcgis.geometry.ISegment[][]) . 
void 
transform(int direction,
ITransformation transformation)
Applies an arbitrary transformation. 
Methods inherited from class java.lang.Object 

clone, finalize, getClass, notify, notifyAll, toString, wait, wait, wait 
Methods inherited from interface com.esri.arcgis.interop.RemoteObjRef 

getJintegraDispatch, release 
Constructor Detail 

public EllipticArc() throws IOException, UnknownHostException
IOException
 if there are interop problems
UnknownHostException
 if there are interop problemspublic EllipticArc(Object obj) throws IOException
EllipticArc theEllipticArc = (EllipticArc) obj;
obj
to EllipticArc
.
obj
 an object returned from ArcGIS Engine or Server
IOException
 if there are interop problemsMethod Detail 

public static String getClsid()
public boolean equals(Object o)
equals
in class Object
public int hashCode()
hashCode
in class Object
public void queryCoords(boolean ellipseStd, IPoint center, IPoint from, IPoint to, double[] rotationAngle, double[] minorMajorRatio, boolean[] isCCW, boolean[] minor) throws IOException, AutomationException
Given the EllipseStd value, returns the Center Point, From Point, To Point, Rotation Angle, Minor Axis to Major Axis Ratio, IsCounterClockwise value, and IsMinor value of the Elliptic Arc. If EllipseStd = TRUE, the From Point and To Point locations are relative offsets from the Center Point rather than the origin.
These are the necessary inputs for PutCoords, except in special cases (half ellipse, full ellipse, Central Angle = 0, and Minor to Major Ratio = 0) where the ArcOrientation must know which of these cases exists to ensure that the desired Elliptic Arc is unambiguous. Any of the output parameters can be set to nil if that info is not desired.
isCCW stands for "is counter clockwise"
queryCoords
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)center
 A reference to a com.esri.arcgis.geometry.IPoint (in)from
 A reference to a com.esri.arcgis.geometry.IPoint (in)to
 A reference to a com.esri.arcgis.geometry.IPoint (in)rotationAngle
 The rotationAngle (in/out: use single element array)minorMajorRatio
 The minorMajorRatio (in/out: use single element array)isCCW
 The isCCW (in/out: use single element array)minor
 The minor (in/out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IEllipticArc.putCoords(boolean, com.esri.arcgis.geometry.IPoint, com.esri.arcgis.geometry.IPoint, com.esri.arcgis.geometry.IPoint, double, double, int)
public void putCoords(boolean ellipseStd, IPoint center, IPoint from, IPoint to, double rotationAngle, double minorMajorRatio, int orientation) throws IOException, AutomationException
PutCoords creates an Elliptic Arc given the EllipseStd value, Center Point, From Point, To Point, Rotation Angle, Minor Axis to Major Axis Ratio, and the Arc Orientation. If EllipseStd = TRUE, the From Point and To Point locations are relative offsets from the Center Point rather than the origin.
Unless the coordinates of the From and To Points are exactly on the defined Elliptic Arc, PutCoords is likely to create an invalid Elliptic Arc. Therefore, it is highly recommended that another Elliptic Arc creation method is used unless all of the necessary input parameters are exactly known.
putCoords
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)center
 A reference to a com.esri.arcgis.geometry.IPoint (in)from
 A reference to a com.esri.arcgis.geometry.IPoint (in)to
 A reference to a com.esri.arcgis.geometry.IPoint (in)rotationAngle
 The rotationAngle (in)minorMajorRatio
 The minorMajorRatio (in)orientation
 A com.esri.arcgis.geometry.esriArcOrientation constant (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IEllipticArc.queryCoords(boolean, com.esri.arcgis.geometry.IPoint, com.esri.arcgis.geometry.IPoint, com.esri.arcgis.geometry.IPoint, double[], double[], boolean[], boolean[])
,
IEllipticArc.putCoordsByAngle(boolean, com.esri.arcgis.geometry.IPoint, double, double, double, double, double)
public void queryCoordsByAngle(boolean ellipseStd, IPoint center, double[] fromAngle, double[] centralAngle, double[] rotationAngle, double[] semiMajor, double[] minorMajorRatio) throws IOException, AutomationException
Given the EllipseStd value, returns the Center Point, From Angle, Central Angle, Rotation Angle, semiMajor axis length, and Minor Axis to Major Axis Ratio for the Elliptic Arc. These are the same parameters used by PutCoordsByAngle to create the Elliptic Arc. If EllipseStd = TRUE, the From Angle is relative to the rotated semiMajor Axis rather than the XAxis.
queryCoordsByAngle
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)center
 A reference to a com.esri.arcgis.geometry.IPoint (in)fromAngle
 The fromAngle (in/out: use single element array)centralAngle
 The centralAngle (in/out: use single element array)rotationAngle
 The rotationAngle (in/out: use single element array)semiMajor
 The semiMajor (in/out: use single element array)minorMajorRatio
 The minorMajorRatio (in/out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IEllipticArc.putCoordsByAngle(boolean, com.esri.arcgis.geometry.IPoint, double, double, double, double, double)
public void putCoordsByAngle(boolean ellipseStd, IPoint center, double fromAngle, double centralAngle, double rotationAngle, double semiMajor, double minorMajorRatio) throws IOException, AutomationException
Creates an Elliptic Arc given the EllipseStd value, Center Point, From Angle, Central Angle, Rotation Angle, semiMajor Axis length, and Minor Axis to Major Axis Ratio. If EllipseStd = TRUE, the From Angle is relative to the rotated semiMajor Axis rather than the XAxis.
This is the recommended way to create an arbitrary Elliptic Arc. However, due to numeric accuracy limitations of computers and trigonometric functions, the From and To Points may be very slightly offset from the expected coordinates. This is important to keep in mind when attempting to connect the endpoints to other segments.
putCoordsByAngle
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)center
 A reference to a com.esri.arcgis.geometry.IPoint (in)fromAngle
 The fromAngle (in)centralAngle
 The centralAngle (in)rotationAngle
 The rotationAngle (in)semiMajor
 The semiMajor (in)minorMajorRatio
 The minorMajorRatio (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IEllipticArc.queryCoordsByAngle(boolean, com.esri.arcgis.geometry.IPoint, double[], double[], double[], double[], double[])
public IPoint getCenterPoint() throws IOException, AutomationException
The CenterPoint is the point where the Major Axis and Minor Axis of the EllipticArc intersect. The CenterPoint is the point from which all angles and distances are calculated to create the EllipticArc.
getCenterPoint
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryCenterPoint(IPoint center) throws IOException, AutomationException
The CenterPoint is the point where the Major Axis and Minor Axis of the EllipticArc intersect. The CenterPoint is the point from which all angles and distances are calculated to create the EllipticArc. You must instantiate the Point before calling QueryCenterPoint. For example,
Dim pPoint as IPoint
Set pPoint = New Point
The QueryCenterPoint method should be used in performance critical situations, where the center point of several arcs needs to be retrieved. The point is populated (not created) by the method. For example, this can be used to get the center point of several arcs in a loop. Creating the point only once outside the loop may improve performance for large number of arcs.
queryCenterPoint
in interface IEllipticArc
center
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void getAxes(double[] semiMajor, double[] semiMinor, double[] minorMajorRatio) throws IOException, AutomationException
Returns the Major Axis, the Minor Axis, and the ratio of the Minor Axis to the Major Axis. The Major Axis is the larger of the two Axes, and the Minor Axis is the smaller Axis. The Major Axis always lies on the line between 0 and Pi Radians in EllipseStd, and the Minor Axis always lies on the line between Pi/2 and 3*Pi/2 Radian in EllipseStd.
The Axes can be set using PutAxes.
getAxes
in interface IEllipticArc
semiMajor
 The semiMajor (in/out: use single element array)semiMinor
 The semiMinor (in/out: use single element array)minorMajorRatio
 The minorMajorRatio (in/out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void putAxes(double semiMajor, double minorMajorRatio) throws IOException, AutomationException
Sets the Major Axis and the Minor Axis. The Major Axis is the larger of the two Axes, and the Minor Axis is the smaller Axis. The Major Axis always lies on the line between 0 and Pi Radians in EllipseStd, and the Minor Axis always lies on the line between Pi/2 and 3*Pi/2 Radian in EllipseStd.
The Axes can be returned using GetAxes.
putAxes
in interface IEllipticArc
semiMajor
 The semiMajor (in)minorMajorRatio
 The minorMajorRatio (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public double getFromAngle(boolean ellipseStd) throws IOException, AutomationException
getFromAngle
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setFromAngle(boolean ellipseStd, double fromAngle) throws IOException, AutomationException
setFromAngle
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)fromAngle
 The fromAngle (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public double getToAngle(boolean ellipseStd) throws IOException, AutomationException
getToAngle
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setToAngle(boolean ellipseStd, double toAngle) throws IOException, AutomationException
setToAngle
in interface IEllipticArc
ellipseStd
 The ellipseStd (in)toAngle
 The toAngle (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public double getCentralAngle() throws IOException, AutomationException
The CentralAngle describes the span of the EllipticArc. The CentralAngle is the angular measure between the FromAngle and the ToAngle. The CentralAngle is measured in Radians and is always between 2*Pi and 2*Pi. If the CentralAngle > 0, then the EllipticArc is oriented in a CounterClockwise direction.
getCentralAngle
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setCentralAngle(double centralAngle) throws IOException, AutomationException
setCentralAngle
in interface IEllipticArc
centralAngle
 The centralAngle (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isPoint() throws IOException, AutomationException
IsPoint returns TRUE when the semiMajor axis = 0. IsPoint returns FALSE when the semiMajor axis > 0 (this includes when the CentralAngle = 0, as this is a welldefined EllipticArc.).
isPoint
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isLine() throws IOException, AutomationException
IsLine returns TRUE when the minorMajorRatio = 0. This is analgous to the semiMinor Axis having a length of 0.
isLine
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isCounterClockwise() throws IOException, AutomationException
IsCounterClockwise returns TRUE if the CentralAngle is greater than 0. If the IsCounterClockwise values differ, setting IsCounterClockwise changes the EllipticArc to its Complement.
isCounterClockwise
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setIsCounterClockwise(boolean isCCW) throws IOException, AutomationException
setIsCounterClockwise
in interface IEllipticArc
isCCW
 The isCCW (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isMinor() throws IOException, AutomationException
IsMinor is TRUE when the CentralAngle < Pi (180 degrees). IsMinor also returns TRUE when the semiMajor axis = 0. If the IsMinor values differ, setting IsMinor changes the EllipticArc to its Complement.
isMinor
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setIsMinor(boolean isMinor) throws IOException, AutomationException
setIsMinor
in interface IEllipticArc
isMinor
 The isMinor (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void complement() throws IOException, AutomationException
The Complement of an EllipticArc is the EllipticArc between the ToPoint and the FromPoint of the original EllipticArc that creates a full ellipse when combined with the original EllipticArc. The Complement maintains the same FromPoint and ToPoint as the original EllipticArc, but has the different IsMinor and IsCounterClockwise values.
complement
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isCircular() throws IOException, AutomationException
IsCircular returns TRUE when the minorMajorRatio = 1.
isCircular
in interface IEllipticArc
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public double getLength() throws IOException, AutomationException
Returns the length of the entire curve. The length of the curve is the sum of the lengths along each parameterized Segment between vertices along the curve.
getLength
in interface ICurve
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public IPoint getFromPoint() throws IOException, AutomationException
Returns or Sets the FromPoint of the first segment of the first part of the curve. While the curve may be composed of many parts and segments each with their own FromPoint, each curve only has a single From Point.
getFromPoint
in interface ICurve
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IPoint
,
ICurve.queryFromPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getFromPoint()
,
ICurve.queryToPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getToPoint()
public void setFromPoint(IPoint from) throws IOException, AutomationException
setFromPoint
in interface ICurve
from
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryFromPoint(IPoint from) throws IOException, AutomationException
Used to query the FromPoint of the first Segment of the first part of the curve.
Note: The output geometry must be cocreated prior to the query. The output geometry is not cocreated by the method; it is populated. This can be used in performance critical situations. For example, creating the geometry only once outside a loop and use the query method could improve performance.
queryFromPoint
in interface ICurve
from
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IPoint
,
ICurve.queryFromPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getFromPoint()
,
ICurve.queryToPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getToPoint()
public IPoint getToPoint() throws IOException, AutomationException
Returns or Sets the ToPoint of the first Segment of the first part of the curve. While the curve may be composed of many parts and segments each with their own ToPoint, each curve only has a single To Point.
getToPoint
in interface ICurve
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IPoint
,
ICurve.queryFromPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getFromPoint()
,
ICurve.queryToPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getToPoint()
public void setToPoint(IPoint to) throws IOException, AutomationException
setToPoint
in interface ICurve
to
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryToPoint(IPoint to) throws IOException, AutomationException
Used to query the ToPoint of the first Segment of the first part of the curve.
Note: The output geometry must be cocreated prior to the query. The output geometry is not cocreated by the method; it is populated. This can be used in performance critical situations. For example, creating the geometry only once outside a loop and use the query method could improve performance.
queryToPoint
in interface ICurve
to
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IPoint
,
ICurve.queryFromPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getFromPoint()
,
ICurve.queryToPoint(com.esri.arcgis.geometry.IPoint)
,
ICurve.getToPoint()
public void queryPoint(int extension, double distanceAlongCurve, boolean asRatio, IPoint outPoint) throws IOException, AutomationException
Returns the Point at a given distance along the curve or extended curve. If the distance is less than the length of the curve, then the returned point is the point at that distance along the curve. If the distance is less than zero, or greater than the length of the curve, then the returned point is on the curve specified by the extension method. The distance may be specified as a fixed unit of measure or a ratio of the length of the curve.
Note: The output geometry must be cocreated prior to the query. The output geometry is not cocreated by the method; it is populated. This can be used in performance critical situations. For example, creating the geometry only once outside a loop and use the query method could improve performance.
queryPoint
in interface ICurve
extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)distanceAlongCurve
 The distanceAlongCurve (in)asRatio
 The asRatio (in)outPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IPoint
,
esriSegmentExtension
public void queryPointAndDistance(int extension, IPoint inPoint, boolean asRatio, IPoint outPoint, double[] distanceAlongCurve, double[] distanceFromCurve, boolean[] bRightSide) throws IOException, AutomationException
Finds the Point on the specified extended curve nearest to the input point and the distance between those points. Also returns information about the side of the curve the input point is on as well as the distance along the curve that the nearest point occurs.
AsRatio is an input parameter that only affects the DistanceAlongCurve
distanceFromCurve is an output parameter that represents the minimum distance between the curve and the input point.
DistanceAlongCurve is an output parameter that represents the distance between the Frompoint of the input curve and the returned point on the curve.
bRightSide is an output parameter that tells if the output point is on the right side of the curve. The direction of the curve determines the right and left sides.
Note: The output geometry must be cocreated prior to the query. The output geometry is not cocreated by the method; it is populated. This can be used in performance critical situations. For example, creating the geometry only once outside a loop and use the query method could improve performance.
queryPointAndDistance
in interface ICurve
extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)inPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)asRatio
 The asRatio (in)outPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)distanceAlongCurve
 The distanceAlongCurve (in/out: use single element array)distanceFromCurve
 The distanceFromCurve (in/out: use single element array)bRightSide
 The bRightSide (in/out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IPoint
public void queryTangent(int extension, double distanceAlongCurve, boolean asRatio, double length, ILine tangent) throws IOException, AutomationException
Given a distance along the curve specified either as a ratio of the length or as a specific fixed distance, QueryTangent returns the Line tangent to the Point. The length and method of tangential extension of the tangent line are given by the user. The method of tangential extension determines the direction of the tangent line as though it were being extended at a From point or a To point.
queryTangent
in interface ICurve
extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)distanceAlongCurve
 The distanceAlongCurve (in)asRatio
 The asRatio (in)length
 The length (in)tangent
 A reference to a com.esri.arcgis.geometry.ILine (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.ILine
public void queryNormal(int extension, double distanceAlongCurve, boolean asRatio, double length, ILine normal) throws IOException, AutomationException
Given a distance along the curve specified either as a ratio of the Length or as a specific fixed distance, QueryNormal returns the Line normal to the Point. The length and method of tangential extension of the normal line are given by the user. The method of tangential extension determines the direction of the normal line as though it were being extended at a From point or a To point.
queryNormal
in interface ICurve
extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)distanceAlongCurve
 The distanceAlongCurve (in)asRatio
 The asRatio (in)length
 The length (in)normal
 A reference to a com.esri.arcgis.geometry.ILine (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.ILine
public void getSubcurve(double fromDistance, double toDistance, boolean asRatio, ICurve[] outSubcurve) throws IOException, AutomationException
Gets the subcurve between the specified points along the original curve and creates a new curve. The elements in the new subcurve are the same type and have the same properties as the elements of the original curve. Which means if:
Input Geometry  Output Geometry 

Polygon  Polyline 
Polyline  Polyline 
Ring  Path 
Path  Path 
Segment  Segment 
If the input geometry is a polygon, you may want to use IRing::GetSubCurveEx which has more capabilities.
getSubcurve
in interface ICurve
fromDistance
 The fromDistance (in)toDistance
 The toDistance (in)asRatio
 The asRatio (in)outSubcurve
 A reference to a com.esri.arcgis.geometry.ICurve (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.IRing.getSubcurveEx(double, double, boolean, boolean, boolean)
,
ICurve.getSubcurve(double, double, boolean, com.esri.arcgis.geometry.ICurve[])
public void reverseOrientation() throws IOException, AutomationException
ReverseOrientation changes the direction of the curve without changing the spatial position of the curve. The From Point and To Point of each Segment in each part of the curve are interchanged.
The ReverseOrientation method works the same way as the Arcedit FLIP command. It reverses the order of the vertices in the Curve.
Caution should be taken in using ReverseOrientation on Polygons. Since ReverseOrientation changes the direction of each Ring within the Polygon, all Exterior Rings become Interior Rings and vice versa.
reverseOrientation
in interface ICurve
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isClosed() throws IOException, AutomationException
A curve is closed if the From and To points of each part of the curve are equal.
IsClosed may still return TRUE if the curve consists of improperly constructed geometries (ex. noncontinuous paths). IsClosed only checks the location of the From and To points of each part, it does not check the internal parts for topological consistency.
isClosed
in interface ICurve
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public int getGeometryType() throws IOException, AutomationException
esriGeometryNull = 0
esriGeometryPoint = 1
esriGeometryMultipoint = 2
esriGeometryPolyline = 3
esriGeometryPolygon = 4
esriGeometryEnvelope = 5
esriGeometryPath = 6
esriGeometryAny = 7
esriGeometryMultiPatch = 9
esriGeometryRing = 11
esriGeometryLine = 13
esriGeometryCircularArc = 14
esriGeometryBezier3Curve = 15
esriGeometryEllipticArc = 16
esriGeometryBag = 17
esriGeometryTriangleStrip = 18
esriGeometryTriangleFan = 19
esriGeometryRay = 20
esriGeometrySphere = 21
getGeometryType
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public int getDimension() throws IOException, AutomationException
Returns the dimension of the geometry object based on the geometry's type.
getDimension
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public ISpatialReference getSpatialReference() throws IOException, AutomationException
Returns and sets the Spatial Reference in which the geometry exists. If the spatial reference has not been set the property will return an empty ISpatialReference instance.
getSpatialReference
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setSpatialReferenceByRef(ISpatialReference spatialRef) throws IOException, AutomationException
setSpatialReferenceByRef
in interface IGeometry
spatialRef
 A reference to a com.esri.arcgis.geometry.ISpatialReference (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isEmpty() throws IOException, AutomationException
IsEmpty returns TRUE when the Geometry object does not contain geometric information beyond its original initialization state. An object may be returned to its original initialization (IsEmpty = TRUE) state using SetEmpty.
isEmpty
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setEmpty() throws IOException, AutomationException
SetEmpty returns the Geometry to its original initialization state by releasing all data referenced by the Geometry.
setEmpty
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryEnvelope(IEnvelope outEnvelope) throws IOException, AutomationException
Returns the unique Envelope that binds the Geometry object. This is the smallest Envelope that Contains the object.
Note: The output geometry must be cocreated prior to the query. The output geometry is not cocreated by the method; it is populated. This can be used in performance critical situations. For example, creating the geometry only once outside a loop and use the query method could improve performance.
queryEnvelope
in interface IGeometry
outEnvelope
 A reference to a com.esri.arcgis.geometry.IEnvelope (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public IEnvelope getEnvelope() throws IOException, AutomationException
Returns the unique Envelope that binds the Geometry object. This is the smallest Envelope that Contains the object.
getEnvelope
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void project(ISpatialReference newReferenceSystem) throws IOException, AutomationException
To Project, the geometry needs to have a Spatial Reference set, and not have an UnknownCoordinateSystem. The new spatial reference system passed to the method defines the output coordinate system. If either spatial reference is Unknown, the coordinates are not changed. The Z and measure values are not changed by the Project method.
A geometry is not densified before it is projected. This can lead to the output geometries not reflecting the 'true' shape in the new coordinate system. A straight line in one coordinate system is not necessarily a straight line in a different coordinate system. Use IGeometry2::ProjectEx if you want to densify the geometries while they are projected.
The Project method must be applied on highlevel geometries only. HighLevel geometries are point, multipoint, polyline and polygon. To use this method with lowlevel geometries such as segments (Line, Circular Arc, Elliptic Arc, Bézier Curve), paths or rings, they must be wrapped into highlevel geometry types.
If a geometry is projected to a projected coordinate system that can't represent the geographic area where the geometry is located (or if trying to move an xy coordinate from outside the projected coordinate system back into geographic), the geometry will be set to empty.
Note: This method can only be called upon the top level geometries (Points, Multipoints, Polylines and Polygons). If the from/to spatial references have different geographic coordinate systems, the Project method looks for a GeoTransformationsOperationSet. If the set of Geotransformations is present in memory, Project will use it to perform a geographic/datum Transformation. To use a specific geotransformation, use the IGeometry2::ProjectEx method.
project
in interface IGeometry
newReferenceSystem
 A reference to a com.esri.arcgis.geometry.ISpatialReference (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void snapToSpatialReference() throws IOException, AutomationException
snapToSpatialReference
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void geoNormalize() throws IOException, AutomationException
geoNormalize
in interface IGeometry
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void geoNormalizeFromLongitude(double longitude) throws IOException, AutomationException
geoNormalizeFromLongitude
in interface IGeometry
longitude
 The longitude (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void move(double dx, double dy) throws IOException, AutomationException
Moves the Geometry dX units along the XAxis and dY units along the YAxis. Only changes the position of the Geometry without altering any of the other characteristics. Move is a spatial offset.
move
in interface ITransform2D
dx
 The dx (in)dy
 The dy (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void moveVector(ILine v) throws IOException, AutomationException
Moves the Geometry dX units along the XAxis and dY units along the YAxis, where dX and dY are calculated from the input vector Line. Only the Length and Angle of the vector affect the transformation. The location of the vector does not change the transformation. Only changes the position of the Geometry without altering any of the other characteristics. Move is a spatial offset.
moveVector
in interface ITransform2D
v
 A reference to a com.esri.arcgis.geometry.ILine (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void scale(IPoint origin, double sx, double sy) throws IOException, AutomationException
Stretches the Geometry a factor of sX along the XAxis and a factor of sY along the YAxis (where sX is the ratio of Old Width to New Width, and sY is the ratio of Old Height to New Height). The Origin point is the reference Point from which the transformation is performed (Regardless of the location of the Origin point, the Geometry resulting from the transformation is the same, except for a positional offset). The Origin is the only point in the transformation guaranted to remain in the same location after the transformation is complete.
Note: Caution must be taken when scaling a CircularArc or a geometry containing CircularArc segments. Unless Abs(ScaleX) = Abs(ScaleY), the resulting CircularArcs will not retain the characteristics of the original geometry (since they remain CircularArcs).
scale
in interface ITransform2D
origin
 A reference to a com.esri.arcgis.geometry.IPoint (in)sx
 The sx (in)sy
 The sy (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void rotate(IPoint origin, double rotationAngle) throws IOException, AutomationException
Rotate performs an angular transform (rotation) on the Geometry. The Origin is the only point in the transformation guaranteed to remain in the same location after the transformation is performed. Regardless of the Origin, the transformed Geometry is the same, except for a positional offset. The RotationAngle is measured in radians.
An Envelope cannot be Rotated.
rotate
in interface ITransform2D
origin
 A reference to a com.esri.arcgis.geometry.IPoint (in)rotationAngle
 The rotationAngle (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void transform(int direction, ITransformation transformation) throws IOException, AutomationException
transform
in interface ITransform2D
direction
 A com.esri.arcgis.geometry.esriTransformDirection constant (in)transformation
 A reference to a com.esri.arcgis.geometry.ITransformation (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void putCoordsEx(IPoint from, IPoint to) throws IOException, AutomationException
PutCoordsEx allows both the fromPoint and the toPoint to be set simultaneously.
A Conformal Transformation based on the original points and the new points
is applied to the curve.
putCoordsEx
in interface ICurve2
from
 A reference to a com.esri.arcgis.geometry.IPoint (in)to
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryPointsAndDistances(int extension, double searchRadius, IPoint inPoint, boolean asRatio, double[] distanceFromCurve, IEnumPointAndDistance[] pointsAndDistances) throws IOException, AutomationException
This method is similar to QueryPointsAndDistance; but it handles the case where the location of the minimum distance is not unique (See picture below). QueryPointAndDistance returns only the first location, this method returns all locations of minimum distance.
AsRatio is an input parameter that only affects the DistanceAlongCurvereturned as part of the output IEnumPointAndDistance enumerator.
distanceFromCurve is an output parameter that represents the minimum distance between the curve and the input point.
IEnumPointAndDistance is an enumerator (it inherits from IEnumVertex) over all nearest points on the curve
queryPointsAndDistances
in interface ICurve3
extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)searchRadius
 The searchRadius (in)inPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)asRatio
 The asRatio (in)distanceFromCurve
 The distanceFromCurve (in/out: use single element array)pointsAndDistances
 A reference to a com.esri.arcgis.geometry.IEnumPointAndDistance (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryCurvature(double distanceAlongCurve, boolean asRatio, double[] curvature, ILine unitVector) throws IOException, AutomationException
Returns the curvature at a specified distance along the segment. The distance can be given explicitly or as a ratio of the entire length of the segment. The curvature is returned as a Line representing a directional unit vector (in the direction going from the From Point to the To Point) and a double representing the magnitude of the vector of curvature.
The unit vector returned by QueryCurvature points toward the center of the circle that has the same first and second derivative at the queried point with a curvature value equal to 1 / Radius of that circle.
queryCurvature
in interface ISegment
distanceAlongCurve
 The distanceAlongCurve (in)asRatio
 The asRatio (in)curvature
 The curvature (out: use single element array)unitVector
 A reference to a com.esri.arcgis.geometry.ILine (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public int returnTurnDirection(ISegment otherSegment) throws IOException, AutomationException
Returns the Turn Direction of the Segment immediately following the current Segment. The two segments must be connected between the To Point of the first segment and the From Point of the second segment. ReturnTurnDirection returns a long corresponding to an esriTurnDirectionEnum or a combination of esriNoTurn or esriUTurn and esriRightTurn or esriLeftTurn. If the two segments are tangential at the point of connection and not completely colinear, then a combination of esriTurnDirectionEnums are returned.
ReturnTurnDirection is only available for Lines and CircularArcs, not BezierCurves or EllipticArcs.
returnTurnDirection
in interface ISegment
otherSegment
 A reference to a com.esri.arcgis.geometry.ISegment (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void splitAtDistance(double distances, boolean asRatio, ISegment[] fromSegment, ISegment[] toSegment) throws IOException, AutomationException
Splits the input Segment at the given distance and returns the Segment between the original From Point and the split point as well as the Segment between the split point and the original To Point. The split distance may be specified as a ratio of the total distance if AsRatio = TRUE, otherwise the distance is in the same units as the Length of the Segment.
splitAtDistance
in interface ISegment
distances
 The distances (in)asRatio
 The asRatio (in)fromSegment
 A reference to a com.esri.arcgis.geometry.ISegment (out: use single element array)toSegment
 A reference to a com.esri.arcgis.geometry.ISegment (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void splitDivideLength(double offset, double length, boolean asRatio, int[] numSplitSegments, ISegment splitSegments) throws IOException, AutomationException
GeometryEnvironment.splitDivideLength(com.esri.arcgis.geometry.ISegment, double, double, boolean, int[], com.esri.arcgis.geometry.ISegment[][])
.
Outputs an array of Segments of a desired input length starting at an offset distance along the curve and continuing until the end of the Segment is reached. The offset and length may be specified as a ratio of the total length of the Segment. SplitDivideLength outputs an array of Segments and the number of Segments in that array. All of the output Segments in the array have the desired input length with the exception of the final Segment which has a length less than or equal to the input length (the remainder of the Segment).
splitDivideLength
in interface ISegment
offset
 The offset (in)length
 The length (in)asRatio
 The asRatio (in)numSplitSegments
 The numSplitSegments (in)splitSegments
 A reference to a com.esri.arcgis.geometry.ISegment (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void densify(int cInSlots, double maxDeviation, int[] pcOutSegments, ILine[] segments) throws IOException, AutomationException
GeometryEnvironment.densify(com.esri.arcgis.geometry.ISegment, double, int[], com.esri.arcgis.geometry.ILine[][])
.
Densifying individual segments can be accomplished in client code by add the segment to a temporary polyline, then densifying the polyline using one of the methods on IPolycurve. Alternatively, the IGeometryBridge interface on the GeometryEnvironment object can be used.
densify
in interface ISegment
cInSlots
 The cInSlots (in)maxDeviation
 The maxDeviation (in)pcOutSegments
 The pcOutSegments (out: use single element array)segments
 A reference to a com.esri.arcgis.geometry.ILine (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void geographicShift(double splitLongitude) throws IOException, AutomationException
geographicShift
in interface ISegment
splitLongitude
 The splitLongitude (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void constructEnvelope(IEnvelope boundingEnvelope) throws IOException, AutomationException
ConstructEnvelope creates an EllipticArc from a given Envelope. The constructed EllipticArc is the full EllipticArc that has the given Envelope as its Envelope. The EllipticArc has a Major Axis equal to the larger of the Width and Height, and the Minor Axis equal to the smaller of the Width and Height. The CenterPoint of the EllipticArc is the CenterPoint of the Envelope.
The method ignores the Z values of the given envelope and therefore the output elliptic arc is 2D.
constructEnvelope
in interface IConstructEllipticArc
boundingEnvelope
 A reference to a com.esri.arcgis.geometry.IEnvelope (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void constructUpToFivePoints(IPoint from, IPoint to, IPoint thru, IPoint point4, IPoint point5) throws IOException, AutomationException
Constructs an EllipticArc using as many of the zero to five input points as possible. The first input point is always the From Point of the constructed EllipticArc. The second input point is always the To Point of the constructed EllipticArc. The third point is the Thru Point of the EllipticArc and is always guaranteed to lie on the constructed EllipticArc. The fourth and fifth points may lie on either the constructed EllipticArc or the embedded extension of the EllipticArc. The first three input points are guaranteed to be used in the construction of the EllipticArc. The fourth and fifth points are used in preferential order as long as they do not create an invalid EllipticArc. All points used to construct an EllipticArc must lie on a Convex Hull, otherwise the fourth or fifth nonconvex points are discarded to maintain convexity. Zero input points defines an empty EllipticArc. One input point defines a degenerate IsPoint EllipticArc. Two disjoint input points uniquely define a degenerate IsLine EllipticArc with the points at the end of the semiMajor axis with a Minor/Major Ratio of 0. Three noncolinear input points uniquely define an IsCircular EllipticArc in the same manner as ConstructThreePoints constructs a CircularArc. Four input points on a convex hull may be sufficient to uniquely define an unrotated (or Pi / 2 rotated) EllipticArc. For cases where an unrotated EllipticArc cannot be fit to the input points, a reasonable rotated EllipticArc is constructed to fit the input points (this EllipticArc is not the only rotated EllipticArc that can be fit to the input points.).
constructUpToFivePoints
in interface IConstructEllipticArc
from
 A reference to a com.esri.arcgis.geometry.IPoint (in)to
 A reference to a com.esri.arcgis.geometry.IPoint (in)thru
 A reference to a com.esri.arcgis.geometry.IPoint (in)point4
 A reference to a com.esri.arcgis.geometry.IPoint (in)point5
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void constructQuarterEllipse(IPoint fromPoint, IPoint toPoint, boolean cCW) throws IOException, AutomationException
ConstructQuarterEllipse constructs a quarter EllipticArc between a given From Point and To Point with the desired orientation. The From Point and the To Point lie on the ends of the EllipticArc Axes. The constructed quarter Ellipse can be thought of as being the EllipticArc within the envelope defined by the From Point and To Point with a semiMajor axis equal to the longer side of the envelope and a semiMinor axis equal to the shorter side of the envelope.
constructQuarterEllipse
in interface IConstructEllipticArc
fromPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)toPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)cCW
 The cCW (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void constructTwoPointsEnvelope(IPoint fromPoint, IPoint toPoint, IEnvelope suggestedEnvelope, int orientation) throws IOException, AutomationException
ConstructTwoPointsEnvelope constructs an EllipticArc given the From and To Points and a suggested Envelope as input. The constructed EllipticArc has characteristics similar to the full ellipse defined by the input Envelope. The final EllipticArc may vary slightly from the input Envelope depending on how well the input Points fit the suggested EllipticArc.
constructTwoPointsEnvelope
in interface IConstructEllipticArc
fromPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)toPoint
 A reference to a com.esri.arcgis.geometry.IPoint (in)suggestedEnvelope
 A reference to a com.esri.arcgis.geometry.IEnvelope (in)orientation
 A com.esri.arcgis.geometry.esriArcOrientation constant (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void queryNearestPoint(IPoint p, int extension, IPoint nearest) throws IOException, AutomationException
Queries the nearest point on a geometry to the input point. Depending on the method of segment extension, the nearest point can also be found on an extension of the geometry.
queryNearestPoint
in interface IProximityOperator
p
 A reference to a com.esri.arcgis.geometry.IPoint (in)extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)nearest
 A reference to a com.esri.arcgis.geometry.IPoint (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.esriSegmentExtension
,
IProximityOperator.returnNearestPoint(com.esri.arcgis.geometry.IPoint, int)
public IPoint returnNearestPoint(IPoint p, int extension) throws IOException, AutomationException
Finds and returns the nearest point on a geometry to the input point. Depending on the method of segment extension, the nearest point can also be found on an extension of the geometry.
returnNearestPoint
in interface IProximityOperator
p
 A reference to a com.esri.arcgis.geometry.IPoint (in)extension
 A com.esri.arcgis.geometry.esriSegmentExtension constant (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.esriSegmentExtension
,
IProximityOperator.queryNearestPoint(com.esri.arcgis.geometry.IPoint, int, com.esri.arcgis.geometry.IPoint)
public double returnDistance(IGeometry other) throws IOException, AutomationException
Returns the minimum distance between two geometries. If the geometries intersect, the minimum distance is 0. Only returns the distance, and not the nearest points.
The geometry combinations which can be used with ReturnDistance are:
Point: Point, MultiPoint, Envelope, Polyline, Polygon, Line, CircularArc, EllipticArc, BezierCurve.
Multipoint: Point, MultiPoint, Envelope, Polyline, Polygon.
Envelope: Point, MultiPoint, Envelope, Line, CircularArc, EllipticArc, BezierCurve, PolyLine, Polygon.
PolyLine: Point, Multipoint, Envelope, PolyLine, Polygon.
Polygon: Point, Multipoint, Envelope, PolyLine, Polygon.
Line: Point, Envelope, Line, CircularArc, EllipticArc, BezierCurve.
CircularArc: Point, Envelope, Line, CircularArc, EllipticArc (not implemented yet), BezierCurve.
EllipticArc: Point, Envelope, Line, CircularArc (not implemented yet), EllipticArc (not implemented yet), BezierCurve (not implemented yet).
BezierCurve: Point, Envelope, Line, CircularArc, EllipticArc (not implemented yet), BezierCurve.
Note: To get the distance between a segment (Line, CircularArc, EllipticArc, BezierCurve) and a MultiPoint, PolyLine or Polygon, add that segment to a PolyLine.
returnDistance
in interface IProximityOperator
other
 A reference to a com.esri.arcgis.geometry.IGeometry (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void interfaceSupportsErrorInfo(GUID riid) throws IOException, AutomationException
Indicates whether the interface supports IErrorInfo.
interfaceSupportsErrorInfo
in interface ISupportErrorInfo
riid
 A Structure: com.esri.arcgis.support.ms.stdole.GUID (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public IClone esri_clone() throws IOException, AutomationException
esri_clone
in interface IClone
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void assign(IClone src) throws IOException, AutomationException
assign
in interface IClone
src
 A reference to a com.esri.arcgis.system.IClone (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isEqual(IClone other) throws IOException, AutomationException
IsEqual returns True if the receiver and the source have the same properties. Note, this does not imply that the receiver and the source reference the same object.
isEqual
in interface IClone
other
 A reference to a com.esri.arcgis.system.IClone (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public boolean isIdentical(IClone other) throws IOException, AutomationException
IsIdentical returns true if the receiver and the source reference the same object.
isIdentical
in interface IClone
other
 A reference to a com.esri.arcgis.system.IClone (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void getMs(double[] fromM, double[] toM) throws IOException, AutomationException
Returns the M attributes held by the From and To point of the segment.
getMs
in interface ISegmentM
fromM
 The fromM (out: use single element array)toM
 The toM (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setMs(double fromM, double toM) throws IOException, AutomationException
Sets the M attributes for the From and To points of the segment. These attributes can be set regardless of the attribute awareness of the segment.
setMs
in interface ISegmentM
fromM
 The fromM (in)toM
 The toM (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void getZs(double[] fromZ, double[] toZ) throws IOException, AutomationException
Returns the Z attributes held by the From and To point of the segment.
getZs
in interface ISegmentZ
fromZ
 The fromZ (out: use single element array)toZ
 The toZ (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setZs(double fromZ, double toZ) throws IOException, AutomationException
Sets the Z attributes for the From and To points of the segment. These attributes can be set regardless of the attribute awareness of the segment.
setZs
in interface ISegmentZ
fromZ
 The fromZ (in)toZ
 The toZ (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void getIDs(int[] fromID, int[] toID) throws IOException, AutomationException
Returns the PointID attributes held by the From and To point of the segment.
getIDs
in interface ISegmentID
fromID
 The fromID (out: use single element array)toID
 The toID (out: use single element array)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.public void setIDs(int fromID, int toID) throws IOException, AutomationException
Sets the PointID attributes for the From and To points of the segment. These attributes can be set regardless of the attribute awareness of the segment.
setIDs
in interface ISegmentID
fromID
 The fromID (in)toID
 The toID (in)
IOException
 If there are interop problems.
AutomationException
 If the ArcObject component throws an exception.


PREV CLASS NEXT CLASS  FRAMES NO FRAMES  
SUMMARY: NESTED  FIELD  CONSTR  METHOD  DETAIL: FIELD  CONSTR  METHOD 